Single-Phase Floor-Standing Heaters

Photo of Floor standing load banks

Single-phase floor-standing heaters are used for testing in small data centres, IT rooms, or office buildings where racks are not in place.

These single-phase units, which vary in loads of 2kW and 3kW, can be plugged into virtually any power connection thanks to our extensive catalogue of splitters and distribution boards.

Where the power connection is 3-phase, or you require larger kW loads, you should use 3-phase floor-standing heaters.

2kw3kw
ModelKinavon BB-FH207Kinavon BB-FH206
Maximum Capacity – Package Load Bank2000 W / 8.5A3000 W / 12.75A
Voltage Ranges (Continuous Operation)210-230 VAC210-230 VAC
Frequency50Hz60Hz
PhasesSingle PhaseSingle Phase
Wires1×3-Core 1.5m 1.5mm Power Cable1×3-Core 1.5m 1.5mm Power Cable
Number of Steps / Load Step Resolution2/1000W2/1500W
Voltage Tolerance (Short Term Operation)Nominal +/-5%Nominal +/-5%
Load Element ToleranceNominal +/-10%Nominal +/-10%
Elements
Insulation Grade
Auxiliary Supply Type Temporary/ TestTemporary/ Test
Auxiliary Supply Voltage Range220-240V / 1ph/ 50Hz220-240V / 1ph/ 50Hz
Auxiliary Rating16A16A
Auxiliary Connection TypeC20C20
Control
ControlRotary Switches (Fan Only, Heat 1, (50%) Heat 2 (10%)
Power Indicator Neon
Rotary Switches (Fan Only, Heat 1, (50%) Heat 2 (10%)
Power Indicator Neon
ProtectionOver temperature protection thermostatOver temperature protection thermostat
Misc.
Load ConnectionsC20 ConnectorC20 Connector
Cooling MethodTangential Fan – Forced Air ConvectionTangential Fan – Forced Air Convection
Exhaust Air Temperature (Approx.)
Air Flow (Approx.)
Load Switching TypeResistiveResistive
Load Switching Contractor Type
Rated Maximum Ambient Temperature OperationNominal 40°C +/-10%Nominal 40°C +/-10%
Rated Minimum Ambient Temperature OperationNominal -10°CNominal -10°C
Rated Maximum Ambient Humidity95% RH – Non Condensing 95% RH – Non Condensing
Altitude RatingLess than 2500 m Above Sea LevelLess than 2500 m Above Sea Level
EnclosurePowder coatedPowder coated
Minimum Inlet Clearance300mm300mm
Minimum Outlet Clearnace300mm300mm
IP RatingIP24IP24
Lifting & Movement 1 Person Lift1 Person Lift

2kw3kw
Physical Dimensions
Depth210 mm210 mm
Width195 mm195 mm
Height340 mm340 mm
Total Weight4.5 KG4.5 KG