3-Phase Floor Standing Load Banks for Data Centres

3-phase floor standing heat load banks provide predictable electrical and heat loads. This enables the testing of the electrical and cooling systems in a controlled environment.

The intended use of a data centre may be all rack-mounted, all floor standing or a mixed IT load. The data centre may be a hosting or co site, where racks will be deployed at a later date after testing completes.

HeatLoad floor standing units are ideal in this type of environment.

  • DANIA 15KW 3-phase floor standing heat load bank

Units can be supplied on a rental only or a fully managed service. HeatLoad will install and manage the load banks for the duration of the testing and de-install at the end of the test.

Additional or bespoke power cables can be supplied to increase the overall length. ‘Open’ power cables can be supplied to allow direct connection to site distribution or PDUs.

Photo of 3-Phase Extension Leads
Input400v 50Hz400v 50Hz400v
Connection (5-pin commando)16 or 32Amp32Amp32Amp
Consumption3 x 13Amp3 x 22Amp3 x 32Amp
Power Lead5m2.5, 5 or 10m2.5, 5 or 10m
Heater Power (kw)4.5/97.5/1511/22
Air Volume (m3


Supply Air Thermostat Cut-Out35°C35°C35°C
Dimensions (HxWxD)54x44x34cm53x38x48cm67x59x52cm