20kW Tower Server Emulators

An image of a 20kW-Server-Emulators

The 20kW Tower Emulator internally is identical to two of it’s predecessors (the 10kW Emulator) stacked on top of one another, but in a combined chassis. Offering low Delta-T solutions for large Data Centres; each unit is capable of to emulating racks with a load capacity anywhere between 1kW- 20kW. The top of the chassis is compatible with the 10kW Emulator, meaning you can stack additional load on top.

There are 6 sets of switches to control the load between; fan only, 50%, 75% and 100% (Operating the units at 50 or 60Hz makes no difference to their performance). Each 20kW Emulator includes 3 x 32A Single Phase connections, but with our extensive catalogue of splitters and distribution boards, we can plug in to virtually any power connection.

Description20 kW Tower Server Emulator
ModelHO750_II/ 21kW
Maximum Capacity – Packaged Load Bank20700 W / 90A
Voltage Ranges (Continuous Operation)220-240 VAC
Frequency50Hz
PhasesX3 1PH / STACK UNIT
Wires3 / 32A Inlets
Load Step Resolution / Heat Increments18 / 1150 W
Voltage Tolerance (Short Term Operation)Nominal + / -5%
Load Element TolerenceNominal + / -10%
ElementsKanthal/ Resistive Wire
Insulation GradeConform to BS 6231 Type CK
Auxiliary Supply TypeTemporary / Test
Auxiliary Supply Voltage Range220-240V / 1ph/ 50Hz
Auxiliary RatingX3 – 32A
Auxiliary Connection TypeX3 – 32A Commando Type Connector
ControlRocker Switches (Fan Only, Heat 1, Heat 3)
Power Indicator Neon
ProtectionOver temperature protection thermostat
Load Connection16A Commando Type Connector
Cooling MethodTangential Fan – Forced Air Convection
Exhaust Air Tempreature (Approx.)Ambient + 12°C-16°C
Air Flow (Approx.)1500L L/S
Load Switching TypeResistive
Load Switching Contractor TypeN/A- Circuit Protection Remote
Rated Maximum Ambient Temperature OperationNominal 45°C
Rated Minimum Ambient Temperature OperationNominal -10°C
Rated Maximum Ambient Humidity95% RH – Non Condensing
Altitude ratingLess than 2500 m Above sea level
EnclosureZinc-Coated steel
Minimum Inlet Clearance300mm
Minimum Outlet Clearance300 m
IP RatingIP20
Lifting & Movement2 Person Lift
Physical DimensionsValueUnit
Length805mm
Width405mm
Height1320mm
Total Weight65KG